How to choose wheels

 Wheels have an enormous influence on speed, stability and overall riding experience. They are usually made of polyurethane, because the only one is durable and runs. However, the life of each wheel is limited. It depends how often you ride. If you want to keep them as long as possible, it's good to swap them on the board.

The basic parameters of wheels include the size, indicated in millimeters, and hardness (durometer). Both parameters are a matter of personal preferences and style what you want to ride.

Wheel size

Small wheels have a lower weight and faster pop, because you have a tail near to the ground and you do not have to reflect as much. Larger wheels provide more stable ride and they better get over with road inequality. Larger wheels are faster. 

50-53 mm - small, slower wheels, street, skatepark and bowl

54-59 mm - average size for beginners and more advanced riders, best suited for street, bowl and ramps

60 mm + - Made for cruising and rough surfaces.

Hardness of wheels determines speed and grip

Material hardness is also a parameter to consider when choosing the right set of wheels. Durometer measures hardness of wheels. Most manufacturers use the hardness renge A, a 103-point renge that indicates how hard the wheel is. Some manufacturers use the B renge, which measures 20 points below. For example, hardness 80b is the same as 100a.

In general, harder wheels are faster and softer are slower, but the softer provide better grip and are more suitable for street skaters. Harder wheels are for smooth surfaces, like skate parks. Some brands even design special wheels for a particular use. E.g. Bones STF Formula for street terrain, while Bones SPF for park terrain.

103-101a - hard wheels for park/street riding

101-99a - street/bowl

99 and less - cruising

Maintenance of wheels

How often you have to change wheels depends on how much and often you will skate. Wheels gradually wear out, the diameter decreases and "platforms" are created. Therefore it is necessary to check them regularly and replace them when needed. 

In order to complete the skateboard, it is necessary to stick it with grip with a rough surface, which makes it easier to use when you do tricks.

Comments

Post a Comment

Popular posts from this blog

Skateboard hardware

 Skate hardware is used to attach the trucks to the board. Each truck needs four screws and lock nuts. The length of the screws you will need depends on which style of riding you prefer.  Skateboard hardware is available in many different lengths and often contains one different colored screw which you can use to mark nose of your skateboard. Hardware will certainly be useful over time as well as other screws. If you find out that the screws are dropping or that they are rusty, it's time to invest in a new set.
Read more

How to choose bearings

 Skateboard bearings are round metal balls that fit inside the wheel. The bearings are always the same size. The only difference is the ABEC categories, from 1 to 9. These categories do not tell anything about their quality, only about accuracy of production as well as its speed. The higher number says that the skate will go faster and better. Bearings on the whole set need the most of your care, so we must not forget to clean and lubricate them. ABEC 1 - bearings are the cheapest, the most crude, and the least accurate. Steel quality is not too high. ABEC 3 - are generally inexpensive, but they also allow a smooth and fast ride. ABEC 5 - standard for most types of skateboarding. Higher speed at an affordable price. ABEC 7 - very fast, longer keeps constant speed, so it is better suited to the pool.
Read more